paper 150305160543

Published: 2015-07-09

Analysis of a Polycarbonate RFID Tag for Blood Chain Tracking

Giuseppe Mazzarella,

Giuseppe Mazzarella

University of Cagliari, Italy

Homepage

G. Boi,

G. Boi

University of Cagliari, Italy

Homepage

S. Casu,

S. Casu

University of Cagliari, Italy

Homepage

Alessandro Fanti,

Alessandro Fanti

University of Cagliari, Italy

Homepage

R. Secci

University of Cagliari, Italy

Homepage

Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)2129-2131

Abstract

In this paper we describe an antenna especially designed for a RFID passive tag working at UHF (867 MHz), for healthcare applications. In particular for the transfusional medicine and the blood supply chain. The tag has to be able to work placed on the top of a blood bag, while the bag is full of blood, and the antenna has been designed with this goal in mind. Therefore we require an antenna able to work close to a (relatively large amount of) lossy medium with high permittivity. Moreover, the bag shape is curved but its shape cannot be predicted exactly, so that the antenna must retain its behavior for a large set of different en- vironments. In order to comply with all those requirements, a printed slot antenna built with a exible substrate has been selected, so that the whole tag can be exible too. The first step was the optimization of the working parameters of the antenna while placed on a perfect planar surface (i.e., assuming the blood bag to be a parallelepiped). Since the actual bag shape is not known, this choice allows to take into account the lossy material, but using a simple geometry. The antenna has been optimized to get the maximum reading distance. Then we consider the effects of a real blood bag (i.e., a curved one), filled with blood, on the antenna behavior. We consider a bag with a transverse section bounded by two arc of circles (with a radius quite larger than the bag size). Since we found a reasonable agreement with the planar antenna we can assume that the antenna behavior is quite insensitive to the bag shape. A robustness analysis, respect to the bag curvature radius, has been performed, too, to assess the antenna use in real environments.

Citation

Giuseppe Mazzarella, G. Boi, S. Casu, Alessandro Fanti, and R. Secci, "Analysis of a Polycarbonate RFID Tag for Blood Chain Tracking," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)2129-2131

References

1. Dobkin, D. M., The RF in RFID: Passive UHF RFID in Practice, Newnes, 2007. Google Scholar

2. Sani, Andrea, Marie Rajab, Robert Foster, and Yang Hao, "Antennas and propagation of implanted RFIDs for pervasive healthcare applications," Proceedings of the IEEE, Vol. 98, No. 9, 1648–1655, September 2010.
doi:10.1109/jproc.2010.2051010 Google Scholar

3. Borrelli, G., F. V. Caredda, A. Fanti, G. Gatto, G. Mazzarella, P. F. Orr, A. Serpi, I. L. Spano, E. Tanzi, A. Volpi, and F. Zedda, "Preliminary study of RFID technologies for health-care applications," The Internetional Workshop on Innovative Simulation for Healthcare, Sep. 2014. Google Scholar

4. Dubok, T.T. J. Coenen, A. Zamanifekri, and A. B. Smolders, "Robust UHF RFID antennas in complex environments," 7th European Conference on Antennas and Propagation (EuCAP), 1695–1699, Apr. 2013. Google Scholar

5. Ibrahim, Raied A. R. and Mustapha C. E. Yagoub, "Practical novel design component of microstrip patch slot antenna MSPSA for RFID applications," IEEE 23rd Canadian Conference on Electrical and Computer Engineering (CCECE), 1–5, May 2010.
doi:10.1109/ccece.2010.5575105 Google Scholar

6. Marrocco, Gaetano, "RFID antennas for the UHF remote monitoring of human subjects," IEEE Transactions on Antennas and Propagation, Vol. 55, No. 6, 1862–1870, June 2007.
doi:10.1109/tap.2007.898626 Google Scholar

7. Franceschetti, G., Electromagnetics: Theory, Techniques, and Engineering Paradigms, Plenum Press, 2013. Google Scholar

8. Fanti, A., R. Secci, G. Boi, S. Casu, G. A. Casula, G. Mazzarella, and G. Montisci, "A polycarbonate RFID tag for blood chain tracking," Antennas Propagation Symposium, 356–357, Vancouver, July 2015.
doi:10.1109/aps.2015.7304564 Google Scholar

9. CST GmbH, CST Microwave Studio Help, CST Studio Suite Version 2011.14.01, Institute of Electrical and Electronics Engineers (IEEE), 2011. Google Scholar