paper 150204090735

Published: 2015-07-09

The Reflectivity of the Ni-Zn Ferrite Tiles in the Microwave Frequency Range

Roman Kubacki

Military University of Technology, Poland

Homepage

Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)700-704

Abstract

In the paper, the investigation of the reflection coefficient of commercially available ferrite tiles at microwaves is presented. This material is typically used as an absorber in anechoic chambers but rather in low frequency range, mainly below 1 GHz where absorptive properties of sintered Ni-Zn ferrite are good enough. In the work it has been demonstrated that such ferrite absorber can also be used in higher frequencies up to 7 GHz. Proposed investigation of ferrite material allows to deeply reveal the reflection as well as the absorption properties of this material.

Citation

Roman Kubacki, "The Reflectivity of the Ni-Zn Ferrite Tiles in the Microwave Frequency Range," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)700-704

References

1. Marrocco, G., "The art of UHF RFID antenna design impedance-matching and size-reduction techniques," IEEE Antennas Propag. Mag., Vol. 50, No. 1, 66-79, 2008.
doi:10.1109/map.2008.4494504 Google Scholar

2. Koskinen, T. V., H. Rajagopalan, and Y. Rahmat-Samii, "A thin multi-slotted dual patch UHF-band metal-mountable RFID tag antenna," Microw. Opt. Technol. Lett., Vol. 53, No. 1, 40-47, 2011.
doi:10.1002/mop.25622 Google Scholar

3. Tseng, Y. M., S. H. Kuo, H. D. Chen, and C. Y. D. Sim, "Circularly polarized circular microstrip RFID tag antenna," Proceedings of APMC, 1142-1144, 2012.
doi:10.1109/apmc.2012.6421850 Google Scholar