PhotonIcs and Electromagnetics Research Symposium,
also known as Progress In Electromagnetics Research Symposium
PIERS Proceedings
Published: 2015-07-09
Enhance the Protection Capability of Intentional Electromagnetic Interference with Inductive Gas Discharge Tube
By
Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)2753-2755
Abstract
A proposed inductive gas discharge tube (IGDT) including two electrodes and one hollow insulator ring is studied. The insulating ring of a GDT has spinal metal outside with inductive characteristics. In comparison to the conventional design, the proposed IGDT can provide early triggering capability during fast IEMI introduced and results a smaller residual surge current.
Citation
Liann-Bie Chang, Jhang-Hsing Hsieh, Tung-Wuu Huang, Ping-Yu Kuei, Chien-Fu Shih, and Chu-Yeh Tien, "Enhance the Protection Capability of Intentional Electromagnetic Interference with Inductive Gas Discharge Tube," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)2753-2755
References

1. Jung, M., Th. Weise, D. Nitsch, and U. Braunsberger, "Upgrade of a 350 kV NEMP HPD pulser to 1.2 MV," 2004 High-Voltage Workshop. Conference Record of the Twenty-Sixth International Power Modulator Symposium, 356-359, 2004.
doi:10.1109/modsym.2004.1433585        Google Scholar

2. Lugrin, G., N. Mora, S. Sliman, F. Rachidi, M. Rubinstein, and R. Cherkaoui, "Overview of IEMI conducted and radiated sources: Characteristics and trends," International Symposiumon Electromagnetic Compatibility (EMC Europe), 24-28, 2013.        Google Scholar

3. Radasky, W. A., C. E. Baum, and M. W. Wik, "Introduction to the special issue on high-power electromagnetics (HPEM) and intentional electromagnetic interference (IEMI)," IEEE Transactions on Electromagnetic Compatibility, Vol. 46, 314-321, 2004.        Google Scholar

4. Savage, Edward and William Radasky, "Overview of the threat of IEMI (intentional electromagnetic interference)," 2012 IEEE International Symposium on Electromagnetic Compatibility, 317-322, August 2012.
doi:10.1109/isemc.2012.6351829        Google Scholar

5. Gowd, K. P., "Parameters for validation of a NEMP hardened facility," 10th International Conference on Electromagnetic Interference & Compatibility, INCEMIC 2008, 645-649, 2008.        Google Scholar

6. Raju, M. R., V. V. R. Sarma, S. M. Satav, K. R. Rao, K. S. Narayana, and Z. H. Sholapurwala, "Fast transient high voltage pulse radiating system for vulnerability studies of NEMP on electronic systems," 10th International Conference on Electromagnetic Interference & Compatibility, INCEMIC 2008, 223-228, 2008.        Google Scholar

7. Rustan, Pedro L., "Description of an aircraft lightning and simulated nuclear electromagnetic pulse (NEMP) threat based on experimental data," IEEE Transactions on Electromagnetic Compatibility, Vol. 29, No. 1, 49-63, February 1987.
doi:10.1109/temc.1987.304332        Google Scholar

8. Naito, Y., "Response characteristics of diode gas discharge tubes," 2012 International Conference on Lightning Protection (ICLP), 1-4, September 2012.
doi:10.1109/iclp.2012.6344335        Google Scholar

9. Savage, Edward and William Radasky, "IEMI evaluation of network protectors," 2013 IEEE International Symposium on Electromagnetic Compatibility, 407-410, August 2013.
doi:10.1109/isemc.2013.6670447        Google Scholar

10. Thomas, M. J. and K. Sunitha, "Transient electric field distribution within the working volume of an NEMP simulator," Proceedings of the 9th International Conference on ElectroMagnetic Interference and Compatibility (INCEMIC), 396-401, 2006.        Google Scholar