paper 150204063056

Published: 2015-07-09

Design of Wideband Multi-way Power Divider with the Modified Impedance Transformer

Ching-Wen Tang,

Ching-Wen Tang

National Chung Cheng University, Taiwan

Homepage

Wei-Min Chuang

National Chung Cheng University, Taiwan

Homepage

Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)1756-1759

Abstract

An easy method for designing the multi-way wideband power divider has been proposed. In order to obtain a wide operational frequency, the corrected coefficients for the wideband impedance transformer are adopted. A wideband four-way power divider has been developed as a design example. Well-matched results of simulation and measurement can validate the proposed approach.

Citation

Ching-Wen Tang, and Wei-Min Chuang, "Design of Wideband Multi-way Power Divider with the Modified Impedance Transformer," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9，Page(s)1756-1759

References

1. Wilkinson, E. J., "An N-way hybrid power divider," IEEE Trans. Microw. Theory Techn., Vol. 8, No. 1, 116-118, 1960. Google Scholar

2. Cohn, S. B., "A class of broadband three-port TEM mode hybrids," IEEE Trans. Microw. Theory Techn., Vol. 16, No. 2, 110-115, 1968.
doi:10.1109/tmtt.1968.1126617 Google Scholar

3. Yee, H. Y., F.-C. Chang, and N. F. Audeh, "N-way TEM-mode broadband power dividers," IEEE Trans. Microw. Theory Techn., Vol. 18, No. 10, 682-688, 1970.
doi:10.1109/tmtt.1970.1127330 Google Scholar

4. Zhou, J., K. A. Morris, and M. J. Lancaster, "General design of multi-way multi-section power dividers by interconnecting two-way dividers," IEEE Trans. Microw. Theory Techn., Vol. 55, No. 10, 2208-2215, 2007. Google Scholar