PhotonIcs and Electromagnetics Research Symposium,
also known as Progress In Electromagnetics Research Symposium
PIERS Proceedings
Published: 2015-07-09
Experimental and Numerical Analyses of Leakage Flux Distribution in Core-type Voltage Transformers
By
Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)780-784
Abstract
This study is based on leakage magnetic flux analysis of a core type transformer. The distributions that obtained experimentally were compared with two-dimensional FDM and FEM calculation results to verify. The experiment set includes a voltage transformer and mea- surement coils that are used to determine leakage flux distribution around of transformer iron leg. With the solution of the matrix created by measuring the induced voltage, polynomial mathematical equations were obtained. Then flux values have been calculated in accordance with the numerical methods. In order to compare the results, plotting of the flux distribution is the best solution. For this purpose, total flux lines was determined. In addition, the difference between the smallest and largest value of the vector potential is also determined. The voltage (potential difference) vector is calculated by dividing the difference to flux lines. In the last step, the equipotential points were determined by adding to the minimum potential value. This process was repeated for eight different heights in the legs and two-dimensional coordinates of the equipotential point was determined at each height. By combining the same valuable points, flux distribution was obtained graphically. Finally, fluxes have been drawn in line with the mea- surement and calculation results, and have been compared with each other. As a result, leakage flux distribution of voltage transformer is obtained and it is observed that FEM calculates closer values to the measurements. According to the study results, the using of the measurements from several points taken with magnetic field probes in FEM model, can provide sufficient accuracy solutions.
Citation
Ismail Bozkurt, Fevzi Kentli, and Nevzat Onat, "Experimental and Numerical Analyses of Leakage Flux Distribution in Core-type Voltage Transformers," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)780-784
References

1. Faghihi, Faramarz and Hossein Heydari, "Reduction of leakage magnetic field in electromagnetic systems based on active shielding concept verified by eigenvalue analysis," Progress In Electromagnetics Research, Vol. 96, 217-236, 2009.
doi:10.2528/pier09080506        Google Scholar

2. Thayalan, I. Daniel Thena and Joung-Hu Park, "Transformer flux leakage modeling and optimization of contactless power converter with an air gap of 1cm for small power applications," 2013 International Conference on Electrical Machines and Systems (ICEMS), 1507-1512, Busan, Korea (South), October 2013.
doi:10.1109/icems.2013.6713341        Google Scholar

3. Sadiku, Matthew N.O., Numerical Techniques in Electromagnetics, 2nd Ed., CRC Press, Boca Raton, 2001.        Google Scholar

4. Hutton, D. V., Fundamentals of Finite Element Analysis, McGraw-Hill, NY, USA, 2004.        Google Scholar

5. Szabo, B. and I. Babuska, Introduction to Finite Element Analysis, John Wiley & Sons Ltd., 2011.        Google Scholar

6. Roylance, D., Finite element analysis, Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, February 2001.        Google Scholar

7. Basak, A., Chi-Hang Yu, and G. Lloyd, "Efficient transformer design by computing core loss using a novel approach," IEEE Transactions on Magnetics, Vol. 30, No. 5, 3725-3728, September 1994.
doi:10.1109/20.312750        Google Scholar

8. Ram, B. S., "Loss and current distribution in foil windings of transformers," IEE Proceedings --- Generation, Transmission and Distribution, Vol. 145, No. 6, 709, 1998.
doi:10.1049/ip-gtd:19982364        Google Scholar

9. Tomczuk, B. and D. Koteras, "Magnetic flux distribution in the amorphous modular transformers," Journal of Magnetism and Magnetic Materials, Vol. 323, No. 12, 1611-1615, June 2011.
doi:10.1016/j.jmmm.2011.01.007        Google Scholar

10. Li, X., Q. Chen, J. Sun, Y. Zhang, and G. Long, "Analysis of magnetic field and circulating current for HTS transformer windings," IEEE Transactions on Appiled Superconductivity, Vol. 15, No. 3, 3808-3813, September 2005.
doi:10.1109/tasc.2005.847453        Google Scholar

11. Feng, Bai, Niu Zhong-Xia, Shi Yu-Jie, and Zhou Dong-Fang, "Finite element analysis of high voltage planar transformer," 2006 7th International Symposium on Antennas, Propagation & EM Theory, 1-4, Guilin, China, October 2006.
doi:10.1109/isape.2006.353292        Google Scholar

12. Ahn, Hyun-Mo, Ji-Yeon Lee, Joong-Kyoung Kim, Yeon-Ho Oh, Sang-Yong Jung, and Sung-Chin Hahn, "Finite-element analysis of short-circuit electromagnetic force in power transformer," IEEE Transactions on Industry Applications, Vol. 47, No. 3, 1267-1272, May 2011.
doi:10.1109/tia.2011.2126031        Google Scholar

13. Mohammed, O. A., Z. Liu, S. Liu, and N. Y. Abed, "Finite-element-based nonlinear physical model of iron-core transformers for dynamic simulations," IEEE Transactions on Magnetics, Vol. 42, No. 4, 1027-1030, April 2006.
doi:10.1109/tmag.2006.872468        Google Scholar

14. Kumar, Ajay, Sanjay Marwaha, Anupama Marwaha, and N. S. Kalsi, "Magnetic field analysis of induction motor for optimal cooling duct design," Simulation Modelling Practice and Theory, Vol. 18, No. 2, 157-164, February 2010.
doi:10.1016/j.simpat.2009.10.002        Google Scholar

15. Wang, X., J. Du, N. Ren, Z. Liu, and R. Tang, "Optimization of stator structure of transverse flux motor," Proceedings of 19th International Workshop on Rare Earth Permanent Magnets & Their Applications, 466-470, Amsterdam, Netherlands, 2006.        Google Scholar

16. Widyan, Mohammad S. and Rolf E. Hanitsch, "High-power density radial-flux permanent-magnet sinusoidal three-phase three-slot four-pole electrical generator," International Journal of Electrical Power & Energy Systems, Vol. 43, No. 1, 1221-1227, December 2012.
doi:10.1016/j.ijepes.2012.05.069        Google Scholar

17. Zakaria, Zulkarnay, Muhammad Saiful Badri Mansor, Aishah Hartini Jahidin, Mohd Shuhanaz Zanar Azlan, and Ruzairi Abdul Rahim, "Simulation of magnetic flux leakage (MFL) analysis using FEMM software," 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA), 481-486, Penang, Malaysia, October 2010.
doi:10.1109/isiea.2010.5679417        Google Scholar

18. Khelil, M. and M. Elleuch, "Modeling of the air-gaps of overlapped joints in three-phase transformer iron core for using by FEM," 2009 6th International Multi-Conference on Systems, Signals and Devices, 1-6, Djerba, Tunisia, March 2009.
doi:10.1109/ssd.2009.4956756        Google Scholar

19. Sibue, Jean-Romain, Jean-Paul Ferrieux, Gérard Meunier, and Robert Periot, "Modeling of losses and current density distribution in conductors of a large air-gap transformer using homogenization and 3-D FEM," IEEE Transactions on Magnetics, Vol. 48, No. 2, 763-766, February 2012.
doi:10.1109/tmag.2011.2174143        Google Scholar

20. Hernández, I., F. de León, J.M. Cañedo, and J.C. Olivares-Galván, "Modelling transformer core joints using Gaussian models for the magnetic flux density and permeability," IET Electric Power Applications, Vol. 4, No. 9, 761-771, November 2010.
doi:10.1049/iet-epa.2010.0070        Google Scholar

21. Hernández, C. and M. A. Arjona, "Design of distribution transformers based on a knowledge-based system and 2D finite elements," Finite Elements in Analysis and Design, Vol. 43, No. 8, 659-665, May 2007.
doi:10.1016/j.finel.2007.01.004        Google Scholar

22. Loizos, George, Themistoklis D. Kefalas, Antonios G. Kladas, and Athanassios T. Souflaris, "Flux distribution analysis in three-phase Si-Fe wound transformer cores," IEEE Transactions on Magnetics, Vol. 46, No. 2, 594-597, February 2010.
doi:10.1109/tmag.2009.2033022        Google Scholar

23. Ma, Xuejun and Dan Zhang, "Computation of leakage flux and magnetic force in transformer by using field-circuit coupled finite element method," 2010 Asia-Pacific Power and Energy Engineering Conference, 1-4, Chengdu, China, March 2010.
doi:10.1109/appeec.2010.5448278        Google Scholar

24. Kentli, F., İ. Bozkurt, and N. Onat, "FDM based flux distribution analysis method for electrical machines," Przegląd Elektrotechniczny, Vol. 89, No. 5, 6-10, 2013.        Google Scholar

25. Tandler, D., "Messung niederfrequenter elektrischer und magnetischer Felder," Proceedings of the EMVU-Kongress, 1-32, Germany, March 1995.        Google Scholar